Steel plate folding box molding machine

Name of Patent Steel Plate Overlapping Edge Packing Box Forming Machine Patent Applicant Wuhan Gangshi Jincheng Packaging Technology Co., Ltd. Principal Applicant Address 430085 Inventor Cao Baogang, Cao Baogang, Cao Wenbing, Cheng Shixiong, commuter garage, Baiyunshan, Qingshan District, Wuhan, Hubei, China Liao Jijun; Wu Youbin; Gong Hanping Application (Patent) No. 200420076512.8 Date of Application 2004.09.07 Approval Date Approval Notice No. 2746997 Date of Publication Approval 2005.12.21 Instruction CD No. D0551 Main Classification Number B21D51/52 Classification No. B21D51/52 Classification Original Application No. First The right-abstract sheet steel folding box forming machine relates to a folding edge forming machine, specifically a forming machine for producing a cold-rolled flat box. It is composed of a frame, a guide mechanism, an oil pump, a depressing cylinder, an adjustable upper moving inner mold, a lower forming mold, a lower shaping mold and an adjustable lower outer mold. On the bottom side of the lower molding die, there are a small claw, a large claw, an overlapping claw and an elastic platform mechanism. The adjustable upper movable mold and the adjustable lower outer mold respectively have a length adjusting mechanism and a width adjusting mechanism. When using the utility model, start the oil pump and press the oil cylinder to press the adjustable upper moving inner mold downwards to the lower forming mold and then continue to run. The adjustable upper movable inner mold bottom contacts the overlapping edge small claws, and the overlapping edge small dials are used. The claws push the large claws of the edge to complete the folding work of the steel plate and form the packing box. When the steel plate is pressed to the lower forming mold, after the pressure is maintained, the adjustable upper moving inner mold rises, and the elastic table mechanism ejects the packing box from the lower shaping mold. The utility model has reasonable structure, convenient operation and high work efficiency. Sovereign items 1, steel plate outside the edge of the box molding machine, characterized in that the frame (1) is equipped with a pressure cylinder (3), adjustable upper moving inner mold (4) is connected with the pressure cylinder (3), adjustable The upper moving inner mold (4) is connected with the frame through the guiding mechanism (5), and the lower movable mold (8) is under the adjustable upper moving inner mold (4), and the lower claws of the lower forming mold (8) are stacked on both sides. (12), large stacking claws (2), overlapped claws (16) and elastic table mechanism (17), under the lower set mold (9), lower set mold (90 middle adjustable outer mold (10 ), Adjustable lower outer mold (10) bottom elastic table mechanism (13), adjustable upper movable inner mold (4), adjustable lower outer mold (10) respectively have length adjustment mechanism (7), (11), Width Adjustment Mechanisms (15), (14) International Application International Announcement Entry into the State Date Patent Agency Wuhan Kaiyuan Patent Agency Co., Ltd. Agency Address ZHU Shenghua