The Hao Zhuang (LNB) brand small spray dryer L-6000Y spray dryer (spray dryer / spray dryer) produced and developed by Shanghai Haozhuang Instrument Co., Ltd. and it is mainly suitable for universities, research institutes and food, pharmaceutical and chemical enterprise laboratories Production of micro-particulate powder, with broad-spectrum applicability to all solutions such as emulsions and suspensions, suitable for drying heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc., because the materials sprayed are only The particles are only exposed to high temperature when they become mist-shaped particles, so they are only heated instantaneously, which can keep these active materials from being damaged after drying.
Product structure characteristics of Shanghai Haozhuang small spray dryer:
â— Original imported nozzle, high efficiency.
â— Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency.
â— Fully automatic control: one-button start-up, after setting the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts automatically, the running animation is displayed on the touch screen, the running process is clearly displayed; just press the stop button when shutting down, the machine will automatically shut down Haozhuang.
â— Manual control: if you need to adjust the process parameters during the experiment, you can easily switch to the manual state, and the color touch screen dynamic display (animation) throughout the experiment
â— Equipped with nozzle cleaner (through needle), when the nozzle is blocked, it will be automatically cleared, and the frequency of the needle can be adjusted automatically.
â— Shutdown protection function: just press the stop button when shutting down, the machine will stop running immediately except for the fan, Haozhuang guarantees that the equipment will not burn out due to misoperation (forced shutdown of the fan)
â— The spraying, drying and collecting systems are made of transparent high-quality borosilicate heat-resistant glass materials, so that the drying process can be carried out in a non-polluting environment.
â— Built-in imported oil-free air compressor, the particle diameter of the powder spray is normally distributed, the fluidity is very good, the noise is very low, less than 60db.
â— The atomization structure of the two-fluid spray, the whole machine is made of high-quality stainless steel material, compact design, no additional equipment.
◠The design of dry temperature control adopts Haozhuang real-time control PID constant temperature control technology, so that the temperature control in the whole temperature zone is accurate, and the heating temperature control accuracy is ± 1 ℃.
â— In order to keep the sample pure, equipped with air inlet filter.
â— The feeding volume can be adjusted by feeding peristaltic pump, the minimum sample volume can reach 50ml.
â— The particle size of the finished dry powder after drying is relatively uniform, and more than 95% of the dry powder is in the same particle size range.
â— For the sticky materials, there is a nozzle cleaner (through needle), which will be automatically cleared when the nozzle is blocked, and the frequency of the needle can be adjusted automatically.
â— Innovative tower wall purge device, the material recovery rate is higher.
The inlet temperature of the small spray dryer produced by Shanghai Haozhuang Instrument Co., Ltd. (LNB) is controlled at 30 ℃ ~ 300 ℃, the outlet temperature is controlled at 30 ℃ ~ 140 ℃, and the amount of evaporated water is 1500mL / H ~ 2000ml h, the maximum feed volume is 2000ml / h (adjustable), the feed method is peristaltic pump adjustment, the minimum feed volume of Haozhuang small spray dryer is 50mL, the temperature control accuracy is ± 1 ℃, Haozhuang average drying The time is 1.0 ～ 1.5S, the power of the whole machine is 3KW / 220V, and the external dimensions of the small spray dryer of LNB brand are the external dimensions of 1200mm (height) × 650mm (length) × 500mm (width)
The main products of Shanghai Haozhuang Instrument Co., Ltd. are small-scale spray dryer, ultrasonic cell crusher, solid phase extraction device, constant temperature shaker, photochemical reaction instrument, carbon dioxide incubator, experimental spray dryer and other laboratory instruments. The company's employees have excellent business qualities, an experienced technical service team, and professional senior engineers with design, development, manufacturing, installation and commissioning of the whole plant's turnkey projects. You are welcome to call and consult us!
Medical hyperbaric oxygen chambers are usually large in size and require professional medical personnel to operate, requiring high levels of professionalism. Modern people are increasingly pursuing quality of life and focusing on health preservation. Therefore, home hyperbaric oxygen chambers have emerged, which are more user-friendly.
The shell of DOING Hyperbaric Oxygen Chamber comes in two types: soft TPU material and hard stainless steel material, which can be selected according to personal preferences.
DOING has independently developed sleeping hyperbaric chambers, sitting hyperbaric chambers, and spherical hyperbaric chambers for users to choose from.
The production of DOING hyperbaric oxygen chambers has undergone layers of inspection to ensure reliable quality and reassure users.
The two transparent observation windows and dual pressure reducing valve design of DOING hyperbaric oxygen chamber greatly improve the safety of use.
The hyperbaric oxygen chamber developed by DOING has a mature and stable control system, which can display real-time values such as PM2.5, temperature, oxygen concentration, and negative ion parameters.
Soft Home Hyperbaric Chamber,Soft Pressure Oxygen Chamber,Soft Oxygen Recovery Chamber,Soft Hyperbaric Healing Chamber
Danyang Doing Articles Co.,Ltd , https://www.dydoing.com