Correct purchase of environmentally-friendly high-quality wooden furniture

It is understood that in the current furniture market, wood furniture has become a major category in the furniture category because of its novel style, bright colors and clear wood grain. Coupled with the relatively moderate price of products, consumers are increasingly favored. Experts suggest that when consumers buy wooden furniture, understanding and mastering the technical requirements of wood furniture and distinguishing their advantages and disadvantages is an effective way to correctly purchase wooden furniture.

Focus on surface quality

The wood-based panel furniture in wood furniture is based on wood-based panels such as particleboard and medium-density fiberboard. The surface is decorated with melamine, PVC, wood veneer and paper grain. The wood-like pattern is clear and natural, smooth and flat. , has a good visual effect and feel. When purchasing furniture, it mainly depends on whether the surface of the furniture material has scratches, indentations, bubbling, degumming and peeling marks.

Focus on production quality

In the production of wooden furniture, the formed plates are assembled by cutting, decorative and edge-sealing parts. Look at the quality of the production of wood-based panel furniture mainly depends on the quality of the cutting saw, the quality of the edge and surface decoration and the quality of the plate port. In the cutting saw, the plate has quality requirements for the flatness, verticality and angle of the plate parts. Generally speaking, the cutting technology of the plate can achieve the accuracy requirement within the range of 0.01 mm per meter. Well, there will be no tilting of the plates after the furniture is made. The side and surface decoration mainly depends on whether the rubber coating on the decorative part is uniform, whether the bonding is firm, whether the trimming is smooth and smooth, whether the end face of the visible part such as the side plate, the door panel and the drawer panel of the component is sealed, and the decoration is finished. There is no trace of adhesion on the edge of the fine board. Assembling the assembly mainly depends on whether the hole at the hole is exquisite and tidy. Whether the connector is firm after installation, whether there is a gap between the plane and the end face, and there is no looseness in the hand. Whether the gap between the door and the drawer is too large, the general requirement is to be between 1.5mm and 2.0mm, and whether the opening and pulling of the door and the drawer are flexible and free.

Office furniture

Office Furniture,Wooden Study Table For Students,Study Table For Home,Childrens Writing Desk

Wuxi Baiyu Pharmaceutical Equipment Manufacturing Co., Ltd , https://www.assembledcabinet.com