[Review]: Plexiglass screen printing: the best choice for low cost and high return
ã€Extended】 ： Analysis of the main points of plexiglass screen printing ink
[Extended]: Analysis of the photo-engraving process of plexiglass screen printing
ã€Extended】 ： Seven points of improvement of plexiglass screen printing process
Product introduction: DBL series is a high-gloss, low-odor single-component screen printing ink with good acid and alkali resistance.
Applicable materials: glass, metal, ceramics, etc.
Applicable mesh: Generally about 300 meshes are suitable.
Ink coverage: 30 square meters per kilogram of ink with 300 mesh mesh.
Ink thinner: 783 slow-drying water can be used, the weight is about 10-15% of the ink weight
Ink cleaning agent: Use 783 slow dry water to clean the mesh cloth.
Drying speed: 150 ℃ -180 ℃ for about 30 minutes.
Instructions:
1) When using DBL series inks, care should be taken to maintain the cleanliness of the metal surface;
2) Add appropriate amount of thinner (oil water) as needed
3) For multi-color overprinting, the next color printing should be performed after surface drying or hard drying
4) The screen is blocked and can be cleaned with thinner or cleaning agent. You need to wait for the screen solvent to volatilize before printing.
5) Do not mix DBL series inks with other inks.
Wpc Fences,Wpc Picket Fence,Wpc Fence Panel,Composite Fencing Panels
ZHEJIANG DEQING GONAT FENCE CO.,LTD , https://www.gonatpvcfence.com