To prevent the film from breaking under high temperatures

LDPE (MFR: 2 g/10 min) 35%, LLDPE (MFR: 1.8 g/10 min) 35%, LDPE (4 g/10 min) 30% R blend produced by DOW Chemicals was blown. Blow-up ratio of 2-3, masterbatch 3-4%, results in hot filling at 100 °C, easy to pull off, why? The film thickness is 65 μm.
This polyethylene blend should be hot-filled at 100°C, and I am afraid that under the pulling force of the filling, even if it does not break, it will have a larger tensile deformation.
Generally, this type of liquid filling film is preferably made of a coextruded composite film with high temperature resistance and good strength, such as nylon. Adhesive resin / PE, although the inner layer is still PE, but the outer layer of nylon film, heat resistance, high strength, but can not use the fuse to fuse and fuse pockets. The PP/EVA/PE coextruded film can be used for melting but the sealing temperature is higher at 190-200°C. The thickness is appropriately increased to 80-90 μm to ensure the strength of the composite film.
Another reason is that the tension is too great. The solution is to reduce the pull of the packaging machine. In fact, after sterilization at 100°C, proper cooling is performed to reduce the temperature of hot filling. As long as it is performed in a sterile room, it also has better packaging effect.

Cloth Pressing Flatiron Rack & Laundry Pile

The clothes hanger [1] is not only an ornament, but also a functional product. The "function" of the clothes hanger has been widely recognized by consumers and has formed an "industry". After several years of running in, the quality of the industry gradually tends to be stable.

In China, "clothes hanger" can also be divided into two types according to product types, one is "lifting clothes hanger", or the so-called "electric clothes hanger", which can be divided into two types: manual and electric. Manual (hand shaking) is more popular, and electric (intelligent) is the development trend; The other is the "floor clothes hanger", which mainly includes airfoil type, X-type, single pole, double pole and other types. Such products are relatively simple, consisting of stainless steel pipes or spray pipes and plastic connectors. They are easy to disassemble and do not need to be installed by special personnel. They are popular with residents.

Cloth Pressing Flatiron Rack & Laundry Pile,Flat Iron Clothes Rack,Ironing Board Rack,Huge Pile of Laundry

OYEAL Global , https://www.oyealhome.com