First, the practice of wood floor decoration
Paste wood floor:
On the concrete structure layer is leveled with 15 mm thick 1:3 cement mortar. Most of the current use of polymer adhesives, the wood floor directly paste on the ground.
Paved wood floor:
The wood floor of the real shop floor type adopts a trapezoidal section wood joists (commonly known as wooden mallets). The distance between the wooden joists is generally 400 mm, and some light materials can be filled in the middle to reduce the empty drum sound when people walk and improve the insulation. Thermal effect. In order to enhance the integrity, the wooden joists are laid on the nail floor and finally on the wool floor, they can be connected or bonded to the wooden floor.
At the junction of a wooden floor and a wall, use a skirting board to cover. To distribute moisture, ventilate holes in the skirting board.
Overhead wood flooring:
Overhead wooden floors are first built on the ground to form ridge walls, then wooden joists, wool floors, and floor coverings are installed. Due to the lower height of family homes, such overhead wooden floors are rarely used in home decoration.
Second, the basic process of wood floor decoration
The paste construction process is:
Grass-roots clean-up → brushing primer → elastic wire, leveling → drilling, installing embedded parts → installing wool floor, leveling, planing → nailing floor, leveling, planing → nailing baseboard → planing, sanding → paint → on wax.
Reinforced composite floor construction process:
Clean the ground floor → lay the plastic film floor mat → paste the composite floor → install the skirting board.
The actual paving construction process is:
Grassroots cleanup→elastic line→drilling installation embedded part→ground moisture proof,waterproof treatment→installing wooden keel→mat insulation layer→bullet line, nailing wool floor→leveling, planing→plywood flooring, leveling, planing→installation Skirting → planing, sanding → painting → waxing.
Three, wooden floor construction essentials
Really install the floor to install the keel, and then paving the wood floor.
The installation method of the keel: It should be embedded on the ground first to fix the wooden keel. The embedded parts are bolts and lead wire. The distance between the embedded parts is 800 mm, and it is drilled from the ground.
Wood floor installation method: solid wood floor should have a base panel, the base panel uses a large core board.
After the floor covering is completed, the surface is planed and planed using a plane, the floor surface is cleaned, and then the floor paint is applied to polish the wax.
After all wooden floors are transported to the construction site, they should be unpacked and stored in the room for more than one week so that the wood floors can be used in accordance with the room temperature and humidity.
Wood flooring should be selected before installation, eliminating defective products with obvious quality defects. The same pattern of color patterns spread in the same room, there is a slight lack of quality but does not affect the use, can be placed on the bottom of the bed, cabinets and other furniture used, the same room thickness must be the same. At the time of purchase, it should be purchased at the expense of a 10% increase in actual paving area.
Pavement wooden floor keel should use pine, fir and other non-deformable tree species, wooden keel, the back of the skirting board should be anti-corrosion treatment.
Paving solid wood floors should be avoided under heavy rain, rainy weather and other climatic conditions. It is best to keep the indoor temperature and humidity stable during construction.
The wooden floor in the same room should be finished at one time. Therefore, sufficient auxiliary materials should be provided, and the finished product should be protected in time to prevent oil pollution, juice, and other contaminated surfaces. The glue that has been squeezed out during installation must be wiped off in time.
Fourth, pay attention to matters
Adhesive wood floor tiles to ensure that the cement mortar floor can not afford to sand, no cracks, the grassroots must be cleaned.
The unevenness of the grass-roots level applies cement mortar leveling and then paving the wood floor. The base layer moisture content is not more than 15%.
When glueing wooden floor glue, it should be thin and even. The height difference between two adjacent wooden floors does not exceed 1 mm.
Plastic floor covering process
We are manufacturer of Cabinet in China, if you want to buy Wood Cabinet,Living Room Cabinet,White Cabinet,Modern Cabinet, please contact us. We sincerely hope to establish business relationships and cooperate with you.
1. European-style TV cabinets mostly like to use wood, low-key luxury. Such as mahogany, elm, pine, etc. Of course, the price of solid wood will definitely be more expensive.
2. At present, there are many types of TV cabinets, such as floor cabinet type, combined type, plate frame structure and so on. You can choose according to your own spatial structure and personal preference.
3. The TV cabinet can be said to be the most dazzling star furniture in the living room, which can reflect the personality, preferences and taste of the owner to a certain extent.
1. Emphasize functional design, simple and smooth lines, and strong color contrast, which are the characteristics of modern style furniture.
2. Extensive use of new materials such as tempered glass and stainless steel as auxiliary materials is also a common decorative technique for modern style furniture, which can give people a sense of avant-garde and unrestrained.
3. Due to simple lines and few decorative elements, modern style furniture needs perfect soft fitting to show its beauty. For example, sofas need cushions, dining tables need tablecloths, beds need curtains and bed sheets. Soft furnishings are the key to modern style decoration. There are many styles of modern and simple chairs, which are enough to meet everyone's diversified market needs.
4. No matter how big the office is, it must be spacious. There is no need for cumbersome decoration and excessive furniture, and the overall coordination of space and furniture is reflected to the greatest extent in decoration and arrangement. In terms of modeling, geometric structures are mostly used, which is the modern minimalist fashion style
Wood Cabinet,Living Room Cabinet,Modern Cabinet
DELO SOFA , https://www.mcmdeco.com