Four practical tips for installing furniture cabinets in renovation

As a kind of furniture fashion, the wall cabinet is one of the standard configurations of European and American home decoration. It is not only beautiful in appearance, but also makes full use of space. The internal frame can be combined in various ways according to individual requirements, which is an ideal choice for modern living rooms. Want to have a set of cabinets, in addition to the quality of the wall cabinet door, some necessary preparations need to pay attention to:

First, the cabinet of the measuring cabinet of the wall cabinet can be either a wall or a sandwich, so as to ensure effective use of space without deformation. However, the top and bottom levels must be vertical and the sides should be vertical. If there is any error, the height difference between the left and right sides of the hole should be less than 5mm. The bottom wheel of the closet door can compensate for the error through the debugging system.

Secondly, the installation of the partition cabinet generally has a drawer design. In order not to affect the use, the position of the design drawer should be noted: when making three sliding doors, avoid the intersection of the two doors; when doing two sliding doors, Placed on the side of a door; when folding the door, the drawer should have a 17cm gap from the side wall.

Thirdly, the installation of the track needs to be reserved for the track when the cabinet is made. The upper and lower rails are reserved for the folding door 8cm and the sliding door 10cm.

Fourth, the installation of the cabinet door is professionally guaranteed. The installation of the cabinet door is generally done by a professional. The steps are: first fix the top rail, the front surface of the rail is in the same plane as the surface of the cabinet, and the upper and lower rails are placed in the reserved position. Then, put two doors into the track, measure the verticality of the door with a level ruler or a ruler, adjust the position of the upper and lower rails and fix it; check again whether the door body is parallel with the two sides, and adjust the door body by adjusting the bottom wheel. , reach the border and the level of both sides; finally fix the anti-jump device and present the quality protection book. Based on this installation procedure, the user can verify whether the selected closet door brand is professional.

Outdoor Charcoal Grill

Outdoor Charcoal Grill,Flat Gas Grill,Outdoor Bbq Grill,Charcoal Bbq Grill

JIANGMEN XINXIN METAL PRODUCTS CO., LTD. , https://www.xxbbqgrills.com