Many people will choose to decorate in the summer, and I believe that there are more or less understandings of the precautions in the decoration process. Or all of them should be handed over to the decoration company and the construction team. However, as the decoration owner of the supervision and acceptance work, there are still some things to know. For example, in the summer decoration finishing work, today, we will talk about the small details that can not be ignored in the summer decoration.
1, lighting installation
Before installation, pay attention to check whether the lamps and their accessories are complete, and there is no damage, deformation, cracking, etc. When installing lighting in a masonry structure, use expansion bolts to fix the use of wooden wedges. Luminaires should not be installed on flammable materials. The height of the fixtures installed indoors should not be less than 2.5m from the ground. In summer, the climate is humid, so pay special attention to electricity safety.
2, wallpaper paste
For the paste of the wallpaper, the substrate should be treated first to ensure that there are no dust, grease and debris. After the wire is stretched, the wallpaper is cut, soaked in clean water, and it can be glued after a few minutes. The back of the wallpaper and the wall should be brushed. The principle of brushing is to go up and down first, then high and then low. After affixing the wallpaper, it is necessary to close the doors and windows 24 hours a day, naturally dry. Due to the wet nature of the summer and the easy skinning of the wallpaper, try to pick a dry weather paste.
3, floor covering
The floor should be installed from the direction of the doorway. When it is necessary to cut the floor, the untidy floor is blocked by the furniture above, without affecting the overall aesthetics. Due to the characteristics of thermal expansion and contraction, it is necessary to pay attention to reducing the width of the seam between the floors during the summer paving process.
4, hardware accessories installation
For the installation of hardware accessories, care should be taken to protect the finished product without damaging the plating. The handle is installed in accordance with ergonomics and is easy to use. The length of the screw should match the thickness of the cabinet door and the drawer surface. Do not top out. The hole diameter of the drill hole should be the same as the screw diameter. After the door lock is installed, the handle should be at the position of the hand from the ground. When installing, ensure that the lock plate is flush with the edge of the door cover.
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetsdoggze.com