Seven factors that affect the safe use of paper cutters

The problem of the safety of paper cutters is a problem easily overlooked by many digital printers. However, once a paper cutter hits an incident, it will not only affect the production, but also cause harm to personnel. The impact on the company will be disastrous. In particular, after the implementation of the new labor law, the compensation of the business owner is also an astronomical figure.

There are several factors that affect the safe use of the paper cutter:

1. Use infrared photoelectric protection device. In normal work, prevent anything from entering under the cutting knife. No matter if any object blocks the photoelectric screen, the emergency brake will be applied to ensure that the knife does not fall.

2, safety latch device. Prevents the platen from coming off and falling, causing injury to the operator.

3, brake device. Many manufacturers use the principle of circuit braking, that is, the upper and lower limit sensors cut off the power supply of the cutter motor. This type of device may cause extremely dangerous conditions such as a sudden power failure, loose sockets, and sensor failure. . In order to prevent this situation from happening, it is necessary to use a motor assembly with a mechanical brake, so that no matter what the circuit failure occurs, the motor is locked to avoid accidents.

4, double button operation principle. This requires that both buttons be pressed at the same time, otherwise the cutter motor will not act, which can guarantee the absolute safety of single operation.

5, in the actual use of the process, often two people with the operation, so that the situation becomes very dangerous, which requires the paper cutter configuration before and after the safety cover. When the safety cover is opened, the motor will not move, ensuring safety.

6, the above is the safety factors that affect the use of the process, then in the maintenance, maintenance should pay attention to replace the blade, use the support tool holder to ensure that the blade edge is closed, both to ensure people's safety, but also ensure that the edge is not damaged.

7. The unloaded blades must not be left unattended to avoid hurting people.

Therefore, the safety issue of equipment with high safety factor deserves attention. The high-end paper cutting machine has its quality, work efficiency, and safety in use, and it has good stability in use. As a printing company wants to develop very well, it must improve the company's production efficiency. So buying equipment is the key issue.