Analysis of matters needing attention in leather cleaning during dry cleaning

Posted on

Viscose is often used to glue the leather together on both sides of the leather garment. Most of the adhesives are not resistant to the dissolution of dry cleaning solvents. When the clothes are immersed in a solvent during dry cleaning, the adhesives are soft and can be soaked from the seams, making it extremely difficult to form. Sometimes, washing the soiled leather several times can reduce or substantially remove the stain. But there is one point. Repeated washing of the leather will cause severe color shedding and will also cause changes in the structure of the leather.
For general stains, use the leather cleaner or neutral detergent produced by Hangxing. Decontamination method: Spread the leather on the chopping board and wipe off the dust with a wrung wet towel. Use a sponge to evenly apply the cleaner to the leather coat, apply a little more on the stain, moisten for about 1 to 2 minutes, and rub it repeatedly with a wrung wet towel. If it can not be removed and stains, apply "strong decontaminant" to the stain, and then wipe it with a towel. After cleaning, the leather must be hung in a cool place to dry. However, the surface of the leather garment is often stuck with oily substances. If it cannot be cleaned, the leather garment is easy to fall off after being oiled, and the base can be peeled off.

Basswood Shutters Components

Basswood shutter Components are made of high-quality basswood material with excellent durability and stability. Its structural design is exquisite, including louvers, connecting rods, drawstrings and other components, which can effectively adjust indoor light and ventilation. The surface of the shutter parts has been finely polished and painted, making it smooth and delicate, with a natural color. It is easy to install and operate. The opening and closing angle of the louver can be freely adjusted according to actual needs to achieve personalized light control. Basswood shutter components not only have a beautiful appearance, but also have good heat and sound insulation effects. They are a high-quality window decoration product suitable for various places such as homes and offices.

1. shutters blade: It is the main component of the blind, used to adjust the angle of sunlight and control the brightness of indoor light.
2. shutters track: supports the blind blades so that they can open, close and rotate smoothly.
3. shutters controller: used to manually or electrically control the opening, closing and rotation angle of the shutters.
4. Louver blades: connected to the shutters blades to increase the sealing and sound insulation effect of the shutters
5. Shutter frame: supports the entire shutter structure to ensure its stability and durability.
6. shutters fixings: Used to fix the position of the shutters to prevent them from being damaged or moved in wind and rain.

Basswood Shutters Components,Plantation Basswood Timber Shutters Components,Basswood For Shutters,Basswood Timber Shutters Components

Huaian Huiyuan Wooden Products Co.,Ltd , https://www.hyshutters.com