The engraving machine is prone to rust when not in use. Due to the wet workshop environment, especially in summer, some parts of the engraving machine are prone to rust, such as bed parts, main shafts, guide rails and other metal parts. Then, if the rusting engraving machine motor spindle has daily use, what kind of situation will it occur? First of all, it must have an adverse effect on the engraving performance of the engraving machine, and then the mechanical work is noisy, and it also slows down the production schedule and precision. So what methods and precautions should we use in daily use to avoid rusting the engraving machine?
1. The surface of steel parts, such as ball screws, hardened steel raceways of rolling guides, and steel fastener surfaces, should be rubbed with cloth or cotton 蘸 butter every few days. In other parts, it should be observed frequently whether there is weak rust, such as the application of cloth with oil to wipe, and as a focus on future rust.
2, the surface of aluminum parts, should also be rubbed with cloth butter every few days, or a layer of varnish. And often observe whether there are eclipses.
3. It is best to fill the emulsified oil in the cooling water tank to prevent rust. Do not use clean water.
Student Desk Chair,Comfortable Chair For Study,Reading Table And Chair ,Classroom Desks And Chairs
GuangDong Gelunya Furniture Manufacturing Co.,Ltd , https://www.gelunyafs.com