Rinse the body of the water bag with hot soapy water. If the effect is not good, use 1/4 dry soda and 3/4 water mixed solution, shake for 30 seconds, add 1/4 cup of lemon juice, shake for another 10 seconds, release the lid and vent the gas. Repeat this three times to remove the gas as much as possible and soak for 20 minutes and then rinse with hot water three times. Warning: Bubbling and negative pressure occur when lemon juice is added to dry soda.
How to disinfect my water bag?
One ounce of household bleach (like Clorox Regular or Clorox Ultra) can be added to one litre of clean water. After mixing for 10 seconds, pour into a water bag and let it sit overnight. Rinse thoroughly and dry naturally.
How to boil my water bag?
Fully immerse the water bag in the watering pot. Make sure that the water bag does not touch the bottom and all sides of the pan, and do not cover the pan. Be aware of the pressure changes in the water bag when boiling. Do not put the water bag in the microwave oven.
How to freeze my water bag?
Place a half-full water bag in the freezer.
My suction valve is too loose. What should I do?
In order to obtain the firmest fixed contact between the two, the best method is to first remove the suction valve from the water bag. Then remove a small portion of the end of the bag, pry the end of the bag and replace the end of the bag with the back of the suction valve. When it is dry, there will be excellent frictional contact.
How can I prevent the water in the water bag from freezing at low temperatures?
Drink regularly to keep fluids flowing. And don't leave liquids. And place the water bag in the bag or jacket as much as possible.
Tips for avoiding leaks.
To avoid liquid leakage, make sure that the valve is fully engaged with the nozzle and that the bottle cap is as firmly positioned as possible. Also make sure that the pull cap is completely closed to avoid unexpected leaks.
How to disinfect my water bag?
One ounce of household bleach (like Clorox Regular or Clorox Ultra) can be added to one litre of clean water. After mixing for 10 seconds, pour into a water bag and let it sit overnight. Rinse thoroughly and dry naturally.
How to boil my water bag?
Fully immerse the water bag in the watering pot. Make sure that the water bag does not touch the bottom and all sides of the pan, and do not cover the pan. Be aware of the pressure changes in the water bag when boiling. Do not put the water bag in the microwave oven.
How to freeze my water bag?
Place a half-full water bag in the freezer.
My suction valve is too loose. What should I do?
In order to obtain the firmest fixed contact between the two, the best method is to first remove the suction valve from the water bag. Then remove a small portion of the end of the bag, pry the end of the bag and replace the end of the bag with the back of the suction valve. When it is dry, there will be excellent frictional contact.
How can I prevent the water in the water bag from freezing at low temperatures?
Drink regularly to keep fluids flowing. And don't leave liquids. And place the water bag in the bag or jacket as much as possible.
Tips for avoiding leaks.
To avoid liquid leakage, make sure that the valve is fully engaged with the nozzle and that the bottle cap is as firmly positioned as possible. Also make sure that the pull cap is completely closed to avoid unexpected leaks.
Zhongshan Seven Cool Electronics Technology Co.,Ltd , https://www.gdsevencool.com