When using the Feiteng typesetting software to schedule a report, in order to expel a layout easily and quickly, the operator has a variety of typesetting options. The layout of a press version is mainly to complete two steps: the first is to discharge the entire layout, and the second is to modify the layout text and layout. After the two steps are completed, the film printing can be output. How can you make typesetting simple and quick and easy to modify the arrangement of the layout? In the following content will be a brief introduction to some newspaper publishing techniques.
â— The layout setting in the Feiteng typesetting software is the first operation that must be done before the newspaper typesetting. The layout setting can set some relevant parameters correctly according to the actual requirements of the newspaper layout. In the determination of the core must pay attention to whether the layout of the main font size and the main font meets the requirements; if you need to discharge into a number of newspaper pages in a Feiteng file, you also need to consider setting the number of pages; in the core settings should pay attention to the correct settings Column number, number of columns in each column, column spacing, number of lines in the printing plate, line spacing and other parameters; in particular, the blank space parameters should be correctly set according to the output size of the laser photosetter used in the prepress system. Value, most of the time can be set to four parameters of the page margin is 5 mm; for advertising design layout can be based on the size of the layout of the layout of the ad in millimeters or centimeters, and set the line spacing as zero.
â— For a certain kind of newspaper typesetting, the size of the printing plate and the parameter setting of the printing plate should be exactly the same. Prior to the newspaper typesetting, it is necessary to carefully check whether the relevant parameters of the typeface are correct. Otherwise, the page size of the same typeset layout may be inconsistent, and it may cause the main font or card number of the typeface to be inconsistent. Re-layout, a waste of time, affect the publication of newspapers.
â— If there is a problem with the Feiteng typesetting file due to some reasons, when the file cannot be opened or the file is lost, the backup file can be expanded by finding the backup file corresponding to the file (that is, the file with the extension BAK). After the name is directly changed to FIT, it can be used as a layout file. In addition, when using the Feiteng publishing software, you can use the automatic save function provided by the software.
â— When you create a title in a newspaper layout, you can choose some simple methods to operate, in order to facilitate the modification of the title after the layout. Of course, not only the title, but also the typesetting of the entire printing layout should be followed this idea. The operation that takes the longest time in prepress production is the modification of the layout and the text. Therefore, using a simple method to make a layout can greatly facilitate the modification of the layout in the future.
â— When using the Founder Feiteng typesetting software to create a title, it is best to use the method of separating the title block from the text block. Feiteng's typesetting software can use the "Form Title" command to typeset the title of an article, so that the title and the text are produced as an interconnected block. In a newspaper's typesetting, often the title change opportunity is more than the article content change opportunity, use the heading method to discharge the title when it is modified, will affect the layout of the text of the row, so that when the modification Will increase the workload, the operation is more troublesome. If the layout of the title block and the text block is used for typesetting, the layout of the text and the title will not affect each other when the modification is performed, and the workload of the modification is relatively small, thereby greatly facilitating the operation of the operator.
â— In the production of titles, the heading position should be reasonably arranged according to the size of the text blocks of the ranked articles and the position of the layout. For headings with multiple title blocks, it should be noted that the horizontal and vertical rows should be properly matched, and the layout order of the entire title ( For each composed title block, it should be from left to right and from top to bottom.
â— In the production of some complex shapes with irregular shapes, multiple types of title blocks can be used for typesetting. Several words with the same attributes in the title can be grouped together as a block; you can also use a single word and a single word. The method is typesetting, that is, each word in the title consists of a single block. For the production of some simple and irregular titles, some corresponding functions provided by Feiteng's typesetting software can be directly used for typesetting, such as using layout along the line, rotating tools and other methods.
â— The method of using the Feiteng typesetting software to arranging the text is relatively simple. There are two types of typesetting methods available for selection: 1 First draw the text layout partition block, and then place the sample file into the partition block. 2 Do not draw the text block, directly typesetting, after the text into the text and then adjust the partition according to the requirements of the layout. In order to save the typesetting time and reduce the workload of the operator, you can choose the second method to typeset directly. In the layout version, it is best to layout the text block first, and use the remaining space of the text block for the layout of the article title.
â— When sorting the text of the edition, you should pay attention to how the text is divided into columns during the layout. Between the text block and the text block, you should try to avoid using the same number of columns to make the reader feel that there is a barrier; when the text is divided into columns, Avoid narrow text fields. You can increase or decrease the number of columns in the text block according to the actual situation. You should pay attention to avoid situations where there are unequal columns in the text block, except for special requirements. The column spacing should be set to 1 word, except for certain types of advertisements.
â— When reserving an edition, if the title of the text is a vertical essay style, it is better to divide the text block into two columns; if the text block is wider, it should be divided into multiple columns and the vertical title should be placed in the middle. In a column, and preferably the headings occupy a column width; if the headings in the text are vertical, but the headings are not in the middle, and in the corners of the four corners of the entire text block, the best body should not be divided. Columns, so as to avoid the phenomenon that a certain column in the text block is too short or the text is not standardized.
â— When the text of the version is displayed, the text must fill the text displayed in the background, and in the middle of the corresponding text, the lines and columns in the body of the text must be neat.
â— In the layout of the text block, each block of text should be in accordance with the rules of the typesetting, and it should look like a relatively neat layout block. Each post-published article block (including the text block and the title block) is preferably a regular shape (such as a square or a rectangle). It is better not to have multiple corners appear in the text. There is a corner to avoid confusion and reading is inconvenient for readers.
(to be continued)
â— The layout setting in the Feiteng typesetting software is the first operation that must be done before the newspaper typesetting. The layout setting can set some relevant parameters correctly according to the actual requirements of the newspaper layout. In the determination of the core must pay attention to whether the layout of the main font size and the main font meets the requirements; if you need to discharge into a number of newspaper pages in a Feiteng file, you also need to consider setting the number of pages; in the core settings should pay attention to the correct settings Column number, number of columns in each column, column spacing, number of lines in the printing plate, line spacing and other parameters; in particular, the blank space parameters should be correctly set according to the output size of the laser photosetter used in the prepress system. Value, most of the time can be set to four parameters of the page margin is 5 mm; for advertising design layout can be based on the size of the layout of the layout of the ad in millimeters or centimeters, and set the line spacing as zero.
â— For a certain kind of newspaper typesetting, the size of the printing plate and the parameter setting of the printing plate should be exactly the same. Prior to the newspaper typesetting, it is necessary to carefully check whether the relevant parameters of the typeface are correct. Otherwise, the page size of the same typeset layout may be inconsistent, and it may cause the main font or card number of the typeface to be inconsistent. Re-layout, a waste of time, affect the publication of newspapers.
â— If there is a problem with the Feiteng typesetting file due to some reasons, when the file cannot be opened or the file is lost, the backup file can be expanded by finding the backup file corresponding to the file (that is, the file with the extension BAK). After the name is directly changed to FIT, it can be used as a layout file. In addition, when using the Feiteng publishing software, you can use the automatic save function provided by the software.
â— When you create a title in a newspaper layout, you can choose some simple methods to operate, in order to facilitate the modification of the title after the layout. Of course, not only the title, but also the typesetting of the entire printing layout should be followed this idea. The operation that takes the longest time in prepress production is the modification of the layout and the text. Therefore, using a simple method to make a layout can greatly facilitate the modification of the layout in the future.
â— When using the Founder Feiteng typesetting software to create a title, it is best to use the method of separating the title block from the text block. Feiteng's typesetting software can use the "Form Title" command to typeset the title of an article, so that the title and the text are produced as an interconnected block. In a newspaper's typesetting, often the title change opportunity is more than the article content change opportunity, use the heading method to discharge the title when it is modified, will affect the layout of the text of the row, so that when the modification Will increase the workload, the operation is more troublesome. If the layout of the title block and the text block is used for typesetting, the layout of the text and the title will not affect each other when the modification is performed, and the workload of the modification is relatively small, thereby greatly facilitating the operation of the operator.
â— In the production of titles, the heading position should be reasonably arranged according to the size of the text blocks of the ranked articles and the position of the layout. For headings with multiple title blocks, it should be noted that the horizontal and vertical rows should be properly matched, and the layout order of the entire title ( For each composed title block, it should be from left to right and from top to bottom.
â— In the production of some complex shapes with irregular shapes, multiple types of title blocks can be used for typesetting. Several words with the same attributes in the title can be grouped together as a block; you can also use a single word and a single word. The method is typesetting, that is, each word in the title consists of a single block. For the production of some simple and irregular titles, some corresponding functions provided by Feiteng's typesetting software can be directly used for typesetting, such as using layout along the line, rotating tools and other methods.
â— The method of using the Feiteng typesetting software to arranging the text is relatively simple. There are two types of typesetting methods available for selection: 1 First draw the text layout partition block, and then place the sample file into the partition block. 2 Do not draw the text block, directly typesetting, after the text into the text and then adjust the partition according to the requirements of the layout. In order to save the typesetting time and reduce the workload of the operator, you can choose the second method to typeset directly. In the layout version, it is best to layout the text block first, and use the remaining space of the text block for the layout of the article title.
â— When sorting the text of the edition, you should pay attention to how the text is divided into columns during the layout. Between the text block and the text block, you should try to avoid using the same number of columns to make the reader feel that there is a barrier; when the text is divided into columns, Avoid narrow text fields. You can increase or decrease the number of columns in the text block according to the actual situation. You should pay attention to avoid situations where there are unequal columns in the text block, except for special requirements. The column spacing should be set to 1 word, except for certain types of advertisements.
â— When reserving an edition, if the title of the text is a vertical essay style, it is better to divide the text block into two columns; if the text block is wider, it should be divided into multiple columns and the vertical title should be placed in the middle. In a column, and preferably the headings occupy a column width; if the headings in the text are vertical, but the headings are not in the middle, and in the corners of the four corners of the entire text block, the best body should not be divided. Columns, so as to avoid the phenomenon that a certain column in the text block is too short or the text is not standardized.
â— When the text of the version is displayed, the text must fill the text displayed in the background, and in the middle of the corresponding text, the lines and columns in the body of the text must be neat.
â— In the layout of the text block, each block of text should be in accordance with the rules of the typesetting, and it should look like a relatively neat layout block. Each post-published article block (including the text block and the title block) is preferably a regular shape (such as a square or a rectangle). It is better not to have multiple corners appear in the text. There is a corner to avoid confusion and reading is inconvenient for readers.
(to be continued)
For novice bakers, choosing the right baking tools is the first lesson on the road to baking. In the end, which tools must be bought, which tools chicken useless? We have prepared the necessary tools for novice bakers.
Baking Tool,Silicone Mesh Steam Mat,Kids Silicone Baking Set,Egg Tart Mold
vchomy , https://www.ivchomy.com