As we all know, failure is one of the undesirable factors affecting production, and it will also affect the quality of the print if it is serious. In order to reduce failures and improve work efficiency, in addition to the normal maintenance and maintenance of equipment, the operator must have a certain ability to distinguish. Some faults can be identified by sound, and the location, degree, and cause of faults can be judged by abnormal sounds, so that timely measures can be taken to deal with them accordingly. Here are a few examples of the sound identification of common faults:
1. The paper suction nozzle makes a slippery "chirp" sound
This is due to the serious wear of the nozzle during long-term use, the suction surface is smooth, or the air path is not smooth, the suction is too small, or it may be due to excessive paper thickness, slippage, or adhesion. According to the situation. Generally, there are the following methods: ①Put a rubber band on the suction nozzle; ② scratch the suction surface of the nozzle with a saw blade or sandpaper to increase the friction; ③ clean the feeder and clear the air path; ④ remove the dirt in the air pump; ⑤ Relevant treatment of paper.
2. There is a "chirp" sound in both mouths of the paper suction nozzle
It may be caused by the following reasons: one is improper adjustment and the suction hole is not correct; the second is that the fixed screw of the piston automatically moves outward, causing the angle of the two suction nozzles to change, which is not parallel to the paper; the third is the air path is blocked or the air volume of the air pump small. Sometimes this happens when the paper is not blown by the blower or the presser foot presses too much, and the brush stops the paper. Can be handled according to the situation.
3. When printing, the drum part makes a "boom" sound
This sound may be caused by the loosening of the plate-drawing screw of the plate clamp. Often, the two platen screws in the middle of the plate clamp will make such a sound once they are loose. When the machine is stopped, the screws can be tightened.
4. The upper part of the machine emits a "buzzing" sound, the faster the speed, the louder the sound
This is due to the fact that the ink is too viscous, sticky paper powder, and excessive paper hairs accumulate on the ink roller. Clean the ink roller, and wipe the paper wool on the heavy roller with a cloth.
5. Separating nozzles emit a "sudden" sound of vacuum
This situation is purely suction hole. You can use a small screwdriver to reach into the suction hole, straighten the suction hole according to the feeling, so that it is consistent with the nozzle connecting rod.
6. The motor makes a trembling "click" sound
Once this sound appears, it indicates that the motor shaft and the handle are severely worn. Shut down immediately and find an electrician and maintenance personnel.
7. There is a "dump" sound that strikes the shield inside the shield
This is the resonance phenomenon that occurs when the machine is running, resulting in a large swing spring of swinging teeth. If you hit the shield, the speed of the vehicle can be adjusted properly, and the sound disappears.
8. There is a serious sound of "wah" dragging on the teeth
If this sound appears continuously after starting up, you can stop the machine and try again. The sound still appears and the teeth do not hold the paper, causing the paper to inertia into the roller. When the machine is shut down, move the head of the swinging tooth shaft by hand. If it feels swaying, it means that the swinging tooth shaft is seriously worn and there is a gap with the sleeve. Replace and repair it.
9. The electromagnetic ferrous iron appears a continuous "slap" sound, but the paper pile does not rise
There are many reasons for this situation. For example, there is something wrong with the electrical appliance, the connection of the electromagnetic iron wick is broken, or the mechanical part of the pawl is turned up.
10. A shrill "sho" sound suddenly appears on the feeder
This sound is the easiest to distinguish, that is, the mouthpiece and the blowing tube are disconnected, and the operator only needs to quickly insert the mouthpiece into the blowing plastic tube.
11. Open Feida electromagnet does not suck, no sound
Drop the paper pile and try to open the feeder. If the above situation occurs again, it means that the travel switch above the presser foot is broken. Replace it. If it is poor contact, it will be dealt with separately.
12. When the operation is started, the motor screams, but the machine does not turn
It means that the brake is working. You can turn the machine back on, and then run it again, it will be normal.
13. The air pump suddenly emits a harsh "buzzing" sound
Generally, the air blow is too small, and it is not coordinated with the suction. Quickly adjust the knob of the air pump to restore the normal state.
14. When the side rule rises and falls, it makes a "click" sound
There are two reasons for this. One is that the pressure regulation spring of the side gauge is too tight; the other is that the eccentric roller touches the lowest point of the cam when the paper-pulling wheel falls, and the rhythm becomes longer, so a rattling sound occurs. Adjust according to the situation.
15. After the paper feed stops, the feeders such as the feeder and the belt pulley all want to move, and they randomly make a "click" sound
This is because the clutch of the Feida part is not completely separated, that is, the top spring is too tight. Loosen the top spring fixing screw and loosen the top spring a little.
16. The water roll of the plate is too undulating and makes a "slam" sound
This is because the water roller holders on both sides are adjusted too low. Tighten the top screws on both sides and readjust the water roller pressure.
Medical Grade Silicone,Bite valve apply to Mouthpiece Nozzle outside diameter is about 0.38 inch/9.6 mm,Please check the dimensions shown in the image to ensure fit.Durable and soft, drains wholesome water from water bladder.Self Sealing, have a one piece construction so there are no water drips.
Our main business is customization Silicone Phone Case,Silicone Rubber Sealing Ring Gaskets Grommets Accessories, Silicone Bracelets, Silicone Watchband, Silicone Keychains, Silicone Kitchenware. Silicone Spoon ,Silicone Stopper, Silicone Placemat Silicone Scrubber,Silicone Baby Products, Silicone Backpack ,Silicone Pet Supplies If you are interested, please consult
Silicone Bite Valve,Silicone Kids Bite Valves,Bpa Free Replacement Bite Valve,Silicone Bite Valve For Cup
Shenzhen Yindingsheng Technology Co., Ltd , https://www.oemsiliconeyds.com