Imitation metal etching ink properties

With the continuous development of screen printing technology, people have higher and higher requirements for ink. Mainly in the high grade, low toxicity and good construction. It is to adapt to this demand, Jinqiao company developed a new generation of UV imitation metal etching ink, this matte ink sand full and dense, good flexibility, but also has good printability. There is no odor after printing, and based on the above characteristics, it is highly praised by the high-end packaging and printing industry such as cigarette labels, foods and health products.

Ink characteristics:

(1) It has good flexibility. If the quality of the paper is acceptable, it can be resistant to die cutting.

(2) No odor, no odor before and after curing.

(3) The printability is good, the sand feeling will not be different before and after the printing, and the temperature will not be too low and the plate will stick.

(4) After printing, the amount of residue is small, and the printing area per unit mass of ink is large.

Application industry: Due to the high price, we mainly recommend environmental protection for high-grade packaging printing.

Scope: gold and silver cardboard, laser cardboard and so on.

Physical properties: Over-web performance: Fine sand 250-300 mesh

Sand 200～250 mesh

Coarse sand 150～180 mesh

Drying conditions: 80～120W/cm 5.6KW×1, UV machine conveyor line speed

15 to 20m/min

Cleaning agent: 707 washing net water

Instructions:

(1) It can be used after being fully stirred, and it is immediately closed after use. The yellow light is safe light.

(2) Wash with a cleaning agent when the net is closed, and wait for the solvent to completely volatilize before printing.

Storage conditions: protected from light, low temperature, sealed and stored. Shelf life is 6 months.

Precautions:

(1) The basic properties of different manufacturers' materials are different. Therefore, after the quality is determined by printing, it will be mass-produced.

(2) In order to ensure the characteristics of this series of inks, hope customers do not use other thinners on their own, use our company's supporting thinner, remember!

(3) If the UV curing is not complete, the firmness of the ink is not reduced, and the surface hardness is low and there is odor.
(4) Improper storage of ink or exceeding the shelf life will change the properties of the ink.