1. The ink must be a table printing ink.
2 ink drying speed. At room temperature, the machine is selected 60-80m/min, and it can be dried thoroughly by blowing with cold air.
3. Little residual solvent. The amount of residual solvents in printed products must meet the national food hygiene standards.
4. The ink transfer performance is good, and the gloss of the graphic after printing is better.
5. The ink after high temperature cooking above 120°C does not fall off, the adhesion fastness is good, the ink does not change color and does not fade.
6. The ink is preferably one-component ink (without curing agent).
7. In addition, the shelf life of the ink should be more than six months.
2 ink drying speed. At room temperature, the machine is selected 60-80m/min, and it can be dried thoroughly by blowing with cold air.
3. Little residual solvent. The amount of residual solvents in printed products must meet the national food hygiene standards.
4. The ink transfer performance is good, and the gloss of the graphic after printing is better.
5. The ink after high temperature cooking above 120°C does not fall off, the adhesion fastness is good, the ink does not change color and does not fade.
6. The ink is preferably one-component ink (without curing agent).
7. In addition, the shelf life of the ink should be more than six months.
Stainless Steel Pots are made from high-grade 18/8 stainless steel. This material is food grade, non-toxic, durable and easy to clean.
Our Stainless Steel Pots are mostly Stainless Steel Vacuum Water Pots. They have a double-wall vacuum treatment, so they can ensure your drink keeps as it is. And you don't need to worry about getting your hands cold or hot.
Stainless Steel Single Wall Pot has a single wall. It sacrifices thermal insulation and improves portability. Holding it in your hand all the time will not cause any discomfort.
Vacuum Travel Pot,Vacuum Coffee Pot,Stainless Steel Pot,Vacuum Pot
Ningbo Auland International Co.,Ltd. , https://www.eversportsbottle.com