Product name: Lab equipment(Steel centre bench)
Type:Â JH-SL028
The size can be custom-made requested by customers.
A. Worktop:Â The worktop is based on the requirement of customers such as phenolic resin board, epoxy resin board or ceramic board. The edge of worktop will be treated specially to ensure its safety for human body.
D. Surface panel for door and drawer:Â The door is with double layer made of 1.0 BAOGANG cold rolled sheet. We can fill the sound insulation material into the inside space between two layers if it's required by customer. The drawer is shaped once made of bending cold rolled sheets. It's with excellent bearing capacity for the support of drawer. The sealed panel after bending connects with the outside drawer surface by self-drilling screws. It can prevent the crashing when closing the drawer and noise caused by abrasing the coated layer.
E. Bottom panel for cabinet body:Â The bottom panel is formed once with reinforcing ribs to increase its bearing capacity and prevent the deforming of steel layers.
F. Handle:Â Stainless steel U-type handle or long handle shaped once made of steel.
G. Movable back panel:Â Movable and free dissembling structure which is convenient for checking water, electricity and gas pipe etc.
H. Movable layer:Â It's with reinforcing rib inside to increase its bearing capacity to avoid deforming. It can be dissembled freely and the height can be adjusted.
I. Hinge:Â Using durable DTC 90 degree or 304 stainless steel hinge which can be used for long time.
J. Drawer sliding rail:Â Using 3-joints bearing drawer rail with noise reduction, it can ensure the full opening for the drawer with good bearing capacity and without deforming.
K. Shelf:Â The shelf is made of steel frame and steel hanging pieces. The layer is made of all steel.
Post Anchor are metal brackets that are set in fence posts or concrete bases to ensure that the building is firmly fixed in the required position. It is also an excellent hardware that can protect your building from rust, corrosion and rot. In addition, it is easy to install, durable and reasonably priced, so it is widely used in wooden fences, mailboxes, street signs, etc.
The surface of the stud is plated with zinc, which means that it can protect itself and the bottom of the column from being damaged by the humid environment. Therefore, in the long run, it has a long service life and can provide you with cost-effectiveness.
Feature of post anchor
1. Four-fin nails can firmly fix the column without digging and pouring.
2. Suitable for metal, wood, plastic columns, etc.
3. Easy to install.
4. No excavation and concrete.
5. Can be reused and repositioned.
6. Long life cycle.
7. Anti-rust.
8. Durable and strong.
Specification of Post anhcor
1. Pillar supporting part: side length or diameter: 50-200 mm. 2. Thickness: 2-4 mm.
3. Length: 500-1000mm.
4. Surface: galvanized or colored coating.
5. Suitable for wood, plastic and metal posts.
6. Custom size and shape are available
Post Anchor,Fence Post Anchors,Concrete Post Anchor,Zipbolt Post Anchor
Shijiazhuang Senbo Industry Co.,ltd , https://www.yylpaper.com