Shanghai Sujing: Selection of special compartment plates for clean rooms

Selection of special compartment plates for clean rooms

Variety of plates

1, solid wood board: As the name suggests, solid wood board is a wooden board made of complete wood. These plates are durable and natural, making them the perfect choice for decoration. However, due to the high cost of such panels and the high construction process requirements, there are not many uses in the decoration. Solid wood boards are generally classified according to the physical name of the board, and there is no uniform standard specification.

2, splint: splint, also known as plywood, commonly known as fine core board. It is made of three or more layers of one-millimeter thick veneer or sheet adhesive. It is the most commonly used material for hand-made furniture. The splint is generally divided into three specifications of 3 PCT, 5 PCT, 9 PCT, 12 PCT, 15 PCT and 18 PCT (1 PCT is 1 mm).

3, decorative panel: decorative panel, commonly known as the panel. It is a decorative sheet with a single-sided decorative effect, which is made by cutting the solid wood board into a thin veneer with a thickness of about 0.2 mm and using a splint as a base material. It is a special way of presenting splints and has a thickness of 3 cm. Decorative panels are a high-end decoration material that is currently different from blending practices.

4, blockboard: blockboard, commonly known as the large core board. The large core board is made of two pieces of veneer in the middle of the veneer. The price of the large core board is cheaper than that of the thin core board, and the vertical direction (differentiated by the core material direction) is poor in bending resistance, but the lateral bending strength is high.

5, particle board: particle board is the use of wood scrap as the main raw material, then infiltrated with glue, the additive is pressed into a thin sheet. According to the pressing method, it can be divided into two types: extruded particle board and flat pressed particle board. The main advantage of this type of sheet is that it is extremely cheap. The shortcomings are also obvious: the strength is extremely poor and the environmental protection is also very poor. It is generally not suitable to make furniture with larger or mechanical requirements.

6. MDF: MDF, also known as fiberboard. It is made of lignocellulosic or other plant fiber, and the artificial board made of urea-formaldehyde resin or other suitable adhesive is divided into high-density board, medium-density board and low-density board according to its density. MDF is also easy to rework due to its soft and impact resistant properties. In foreign countries, MDF is a good material for making furniture, but because the national standards for height plates are several times lower than international standards, the quality of MDF use in China needs to be improved.

Sideboards

Side Cabinet,modern side cabinet,sideboard,minimalist side cabinet

Foshan Poesy Furniture Co., LTD. , https://www.poesy-furniture.com