Underfloor heating is believed to be familiar to everyone. Geothermal is also known as underfloor heating. Its heating effect is very good, and it is energy-saving and environmentally friendly. The cost of use is very low. Therefore, many families are now using it. Regarding underfloor heating, today I will tell you how to charge for underfloor heating and the content of the standard for underfloor heating suppression!
How to charge for floor heating
When the floor heating is suppressed, it is usually done when the property is handed over. The floor heating is mainly divided into water pressure and air pressure, which are generally free of charge. The price of floor heating and radiators is not the same. A radiator is 100 yuan, and the floor heating is 5 yuan per square. This is the price settled by the workers to the company.
Precautions for floor heating suppression
1. If it is suppressed in winter, it is necessary to take anti-freezing measures.
2. It depends on whether the pressure value is normal when pressing, the pressure difference is very important, because the greater the pressure difference, the faster the cycle, so that the heat can be provided continuously.
3. When underfloor heating is used for water injection, the water injection speed must be slow. When the system is full of water, carefully check the tightness of each loop to prevent inaccurate data.
4. After the final pressure test is completed, the pressure will be released and the water will be discharged. At the same time, the corresponding pressure record should be made and archived for future reference.
There are many things to pay attention to during the floor heating suppression process. In fact, the floor heating suppression process is the same as the decoration. Whether the preliminary project is qualified depends mainly on whether the user is satisfied with the inspection. The function of the suppression test is to "determine the universe". Therefore, it is best to choose a professional floor heating installation company for the stress test. First, the professional company's technology is trustworthy, and second, it can also avoid future impacts.
What are the processes of floor heating suppression
1. When pressing, take the water collector of each component as the unit and fill the floor heating system with a water pressure pump. At the same time, the gas in the system piping needs to be drained clean. It should be noted that underfloor heating is a very technical job, and you must ask a professional master for help.
2. Then slowly increase the floor heating to 0.6Mpa or 1.5 times the system working pressure.
3. In the process of boosting, it is necessary to observe and inspect the pipeline of the floor heating at any time to see if there is any leakage between the connection point of the floor heating pipe and the sub-collector and the sub-collector and its connection parts.
4. Check for leaks after one hour of constant pressure.
5. After confirming that there is no leakage, increase the pressure to 0.6Mpa, and finally observe for 15 minutes. The pressure drops to less than 0.03Mpa, which means that the pressure is qualified.
Regarding how to charge the floor heating, I have introduced it here. I hope you will gain something after reading it. Floor heating is a very important heating device in our lives. Especially in winter, the heating effect of floor heating is very good, and it is energy-saving and environmentally friendly.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
DELIN HAIR COSMETICS , https://www.skinbeautymaskfactory.com