The bedside wall lamp is an indispensable presence in life. The night is open and the quiet lights are extraordinarily reassuring. But Xiaobian wants to remind everyone that if you want to use the effect well, the installation must be accurate in place. So, do you know the installation height and steps of the bedside wall lamp? Let's take a look at the installation height of the bedside wall lamp and how to install the bedside wall lamp with Xiaobian.
First, the bedside wall lamp installation height
The height of the bedside wall lamp should be installed. The bottom of the wall lamp should be 1.5-1.8m away from the ground. If it is the wall-mounted bedside wall lamp, the distance between the wall and the bedside wall lamp is generally 10-40cm. If the height of the bed is 45cm, plus the mattress, the height is 90cm, then the height of the bedside wall lamp must exceed 90cm, and it should be placed above the bedside table.
Second, how to install the bedside wall lamp
1, determine the installation height
First of all, we will determine the height of the bedroom wall lamp. The installation height of the bedside wall lamp is 1.5-1.7m from the bottom of the wall lamp; the distance from the bedside wall lamp to the wall is about 95-400mm.
2, make a mark
Once you have determined the height, you have to make a mark. Mark the position where the expansion screw is required on the wall according to the hole on the hanging plate of the wall lamp.
3, drilling
After making the mark, it is necessary to start drilling. Use an electric drill to drill holes in the mark on the wall. Be careful to understand the layout of the line, do not drill the wire, and pay attention to the depth of the hole being drilled.
4, apply adhesive
Make sure the wall light is securely installed. Before installing the wall lamp, apply the adhesive to the bonding surface with a brush; or you can immerse the lower half of the rubber roller in the glue, the upper part is exposed directly or indirectly through the printing roller. When the working surface is in contact, the glue roller is rotated by the workpiece to apply the glue to the bonding surface, which makes the wall lamp more firm.
5, the upper screw
The upper screw is also an important step. After drilling the hole, you can start the expansion screw. First, insert the expansion screw into the hole that has been drilled, and then use a hammer or other thing to push the expansion screw into the wall until it is completely inside the wall. Pass the wood screws through the hole of the wall lamp and fix it on the expansion screw. Note that the fixing on both sides should be alternated, so as to avoid the deviation of the wood screws.
6, install the wall lamp
The last step is to install the wall light. Connect the hanging plate to the ceiling plate with screws, and then screw the top screw to secure the top plate. Finally, disconnect the power from the room, then connect the wires of the wall lamp to the power cord, and install the wall lamp.
The above is about the installation height of the bedside wall lamp, I hope to be helpful to everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net, and help you plan a reasonable space layout and exquisite design through the professional designer's on-site measurement room.
>> Click here for professional designer free room design
Disclaimer: We have used all means to find the source of the picture or content. We have not found the relevant right holder. Please ignore the negligence. If the relevant rights holders see it, please contact us in time. We will delete and proceed as soon as possible. Handle it properly.
Cold Hot Pack,Hot Cold Pads,Hot And Cold Pad,Hot And Cold Packs
Chic Products (China) Co., Ltd. , https://www.chic-gifts.com