[ Chinese wardrobe net ] MDF, solid wood particle board, plywood and large core board can be made into wardrobes , but their advantages and disadvantages are the fundamental guarantee of the overall quality of the wardrobe. Different types of plates have a great influence on the function and production process of the wardrobe, but many consumers do not know much about it.
The plate is the body structure of the wardrobe. The quality of the plate is the fundamental guarantee of the overall quality of the wardrobe. The following small series will introduce you to some mainstream plates in the wardrobe market. These plates have their own advantages and disadvantages, corresponding to different wardrobe needs. Good or bad, I will know when I have seen it.
MDF
Also known as MDF. Plant fiber is the raw material, and the plate made by the process of fiber separation, sizing, drying, paving, hot pressing, sawing and inspection is one of the leading products of artificial board.
Advantages: The material is thinner for edge sealing and it is not easy to open the glue. It's easier to make a shape, usually with more door panels or back panels.
Disadvantages: More glue is used than particle board, which is more likely to cause environmental problems. The moisture resistance is poor, and the water is easily deformed.
Solid wood particle board (particle board)
The particleboard is broken by logs and processed by high temperature and high pressure. The middle layer of the particleboard is wood chips, and the two sides are finely organized wood chips, which are pressed into plates. The surface layer is in the form of a powder layer, and the homogenized particle board is the best. The molecular structure of the particle board is tight and the bending strength is high.
Advantages: good nail holding power, and adhesive content less than 5%, environmental protection. High strength and stability, it is also one of the mainstream artificial boards in the European furniture market.
Disadvantages: The flatness of solid wood particle board is not as good as that of MDF. It is more difficult to make curvature such as curvature.
Splint (plywood)
The line is commonly known as the thin core board. A three-layer or three-layer thin sheet made by cutting a log into a veneer or a wood chip, and then cutting it into a thin wood and then bonding it with an adhesive. An odd number of veneers are usually used, and the fiber directions of adjacent layer veneers are vertically aligned and glued to each other.
Advantages: The hardness of the splint is generally high. Since the material and the texture have been vertically staggered in the gluing process, the strength is large and the deformation is not easy.
Disadvantages: Each layer of plywood is glued together, so its environmental protection is relatively poor.
Blockboard (large core board)
The blockboard is commonly known as the large core board, which is made up of two pieces of veneer laminated in the middle. The middle wood board is processed into a certain specification of wood strips after being heat treated by high quality natural wood boards.
Advantages: Compared with particleboard and medium density fiberboard, blockboard has natural wood characteristics that are more in line with human natural requirements. It has the advantages of light weight, easy processing, good nail holding power and no deformation. It is made of interior decoration and high-grade furniture. Ideal material.
Disadvantages: In the production process of blockboard, there will be problems such as excessive formaldehyde emission, unacceptable transverse static bending strength, unqualified product moisture content, and low bonding strength.
What kind of wardrobe plate is good? I believe that after reading the above and sharing the above, more or less have a certain understanding, you can choose the wardrobe that suits you according to your own situation.
Electric Soup Kettle,Electric Soup Boiler,Electric Soup Warmer,Electric Soup Cauldron
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jetkitchenwarejm.com