Faucet installation knowledge

Installation of faucets in home decoration is an indispensable part. Faucets are needed in kitchens and bathrooms. Do you know that the installation methods of different faucets for different faucets are not the same? Because they do not understand, generally some owners will After the faucet is bought back, it will invite professionals to help with the installation. In the end, what is the installation method of the faucet? Today Xiao Bian will teach you a few tricks. It is not difficult to do it yourself.


What is the installation method of the faucet?

1, first of all to be ready to install tools, check the installation of complete parts before installation is complete, common faucet parts are: hoses, rubber gaskets, showers, water, kidnappers, decorative caps, etc., in addition to the need to prepare waterproof tape, This can never be ignored.


2. Check if the main valve of the tap water is closed. If it is not closed, it can be closed.


3, with waterproof tape in the tap on the thread clockwise winding a few times, Xiao Bian reminded here, this point is very important, waterproof tape direction must be clockwise, if wrapped around the leak phenomenon will occur.


4. Turn the faucet clockwise into the water pipe connector and tighten it with a wrench.


5, open the main valve tap, normal water can be.



A thermostatic faucet installation

Before installing the thermostatic faucet, it is necessary to check whether the water pipe is left hot and right cold. Remember not to connect the hot and cold water pipes to the wrong ones to prevent the faucet from working properly. Gas and solar water heaters cannot use thermostats because the water pressure is too low. Do not forget to install hot and cold water filters when installing thermostats.


Second, wall-mounted faucet installation

When installing the wall-mounted faucet, it is necessary to first flush the water pipe so as to avoid the water quality being too hard to cause damage to the faucet, and the distance between the hot and cold water pipes must reach 15 cm, which cannot be lower than this distance.


Three, single hole faucet installation

The single-hole faucet installation requirements are stable, because the kitchen faucet is used frequently and it is very easy to loosen, so the lock nut must be tightened. At present, there are some faucets on the market that are fixed with nuts for the solenoids. This kind of stability is very good.


Fourth, single hole basin faucet

Please do not forget to flush the water pipes buried in the wall before installing the single-hole basin faucet. If the water inlet pipe is too long to exceed the outlet pipe, cut it according to your actual needs, but remember not to hard bend to 90 degrees or more than 90 degrees.


<\p><\div>

Pet Beds

Pet Beds,Dog Beds,Dog Steps For Bed,Heated Cat Bed

Dongguan Mace Industry Co., Ltd , https://www.maceindustrypetproduct.com