In recent years, plastic products, one of the three major packaging materials, especially expanded polystyrene, have become a red pollution of people's evil. The disposal of these polystyrene foam packaging has caused serious pollution to the environment. The earth's atmospheric ozone layer; the destruction of geological structures caused by the inability to corrode. These foam plastic wastes have caused great damage to the global environment. This article will introduce you to the advantages and disadvantages of metal packaging materials.
Green packaging is one of the major topics in the development of the global packaging industry. The development of green packaging materials is also the focus of the world. The purpose of the development of green packaging materials is to make the materials themselves return to nature, harmless to the human body, and no pollution to the ecological environment; while the processing of materials is low carbon emissions, processable and low energy consumption. Fully in line with the above requirements of green environmental protection, it has more advantages.
Although the disposable non-woven fabric has a great barrier effect on microorganisms, it is not easy to be affected by secondary pollution. The sterilization effective time limit is 6 months, and the resistance to penetration is strong, and there is no wet bag phenomenon. It is more advantageous than Other sterilization packaging materials in terms of physical properties, sterilization compatibility, sterilization quality, and storage efficiency. However, its puncture resistance is poor, it is easy to be broken as a separate packaging material, and it is most likely to cause puncture exposure when it is packaged as a sharp device, which seriously affects the quality of sterilization. Therefore, our hospital generally uses cotton cloth as the inner layer packaging and non-woven fabric as the outer layer packaging, and the effect is very good.
The garbage of the packaging materials of life shall be bagged, stacked at a fixed point, and handed over to the sanitation department for unified disposal; the polystyrene particles, scraps and non-conforming product temporary waste scattered during transportation shall be collected by the production staff and recycled to the temporary waste collection site again. Utilization, the impact is not great. Dangerous solid waste is mainly used equipment waste oil and hydraulic oil. It is collected and recycled by the production staff to the temporary storage place of dangerous waste. The external environment will be less affected after being disposed of by the relevant qualified units.
Article source address: http://
This kind of special designed post can be installed with the panels without clamps and bolts, with easier installation and wider application.T post enjoys an improved rate of 30% in its mechanical property and physical property compared with common steel posts with same section size.T post have nice appearance, easily used, with a low cost. It can also be recovered after years, meet the requirement of national environmental protection, is a kind of environmental friendly product.Steel T post painted commercial grade Fence Post and tree stake; rail steel construction punched, studded and painted green brown and galvanized for all applications steel T-bar posts. It`s many uses include: snow fence,construction fences,hinge lock farm fences.
T Post,T Post Fence,Steel Fence T Post,Metal T Fence Post
Hebei Giant Metal Technology Co., Ltd. , https://www.hebeigiantmetal.com