Nowadays, all the key components of the imagesetters of many enterprises adopt imported parts, including control power supply, grating encoder, frequency converter, traverse drive motor components and various bearings. At the same time, for self-processing gold workpieces, such as outer drums, platforms, Wall panels, screw rods, etc. are all processed by first-class CNC machine tools or machining centers, thus ensuring the quality of the whole machine. This article will introduce you the price of laser imagesetters.
The inspection was carried out in comparison with the row machine, but no obvious failure was found. Remove the upper cover of the cassette, open the photo-setting machine, and let the film enter the film manually. On the other hand, the hand-held motor of the photo-aligning machine automatically turns the wheel and finds that it is rotating, but the friction wheel of the collecting box The speed of rotation is slower. After shutting down, use your finger to move the wheel against the motorized wheel of the machine, and then add some resistance to the friction wheel of the box, and find that it does not rotate.
After careful observation, we can guess that this reason is caused by the long-term friction caused by the rotating wheel of the take-up motor and the friction wheel of the take-up box, which causes the rubber to age and wear, resulting in poor contact between the two rubber wheels. Generally, it can be adjusted by adjusting the sheet of the machine, and the elastic scale of the steel shrapnel on the back of the motor solves the fault, but we found that at this time, the elastic scale has been adjusted to the maximum extent. Therefore, it is only necessary to consider the winding motor and the film box friction rotating wheel to eliminate the malfunction.
CTP publishing common problems are summarized into tables, which can be sorted according to problem description, cause analysis, and solution order, effectively improving the efficiency of processing problems. The inspection standards and record tables must be recorded every day, including plates, RIP parameters, printing plates, and printing plates. And other key information.
Article source address: http://
Cooling Gel Foam Mattress,Cooling Gel Memory Foam Mattress,Gel Memory Foam Mattress,Coil Gel Memory Foam Mattress
HESHAN HAIMA FURNITURE CO., LTD , https://www.springmattress.com