Printing equipment processing process introduction

The printing process depends on the printing equipment. Different types of materials, labels for different purposes, and different process flows are used. The general label printing machine is a multi-functional equipment, and the processing factory can formulate the printing processing technology according to the requirements of the customer.

The printing equipment processing process is as follows:

(1) Unwinding

There is no tension change when the roll is unwound, so no adjustment is required. It is applied on the flat flat and round flat labeling machine, and the unwinding speed is slow. Since such equipment does not have a paper positioning correction device, the end face of the web is required to be clean and tidy, ensuring accurate overprinting during printing.

(2) Hot stamping

Flat flattening is applied to round flattening and flat flat labeling machines with low speed.

(3) Printing

Suitable for label printing with solid, general pattern, for simple color mesh printing. The round pressing circle is suitable for printing all kinds of pattern labels, especially suitable for high-grade color mesh label printing.

(4) First hot stamping, then printing

On ordinary equipment without UV drying, the disadvantage is that the design of the printed pattern is limited.

(5) Printing first, then bronzing

It is applied to the equipment with UV drying device. After the ink is quickly dried, the ink is bronted on the ink. The bronzing pattern is designed freely and is not restricted by the ink. It is suitable for the printing of high-grade labels. It is an advanced production process.

(6) glazing

A layer of varnish is applied to the surface of the ink to protect the ink layer from moisture, water and surface gloss. It can replace the lamination process and adopt UV drying.

(7) Laminating

The film is coated on paper or film material to protect the ink, waterproof, moisture-proof, increase the strength of the label, and increase the three-dimensionality of the pattern. The laminating film is divided into a bottomed paper laminating film and a bottomless paper laminating film. Due to the low cost of the latter, it is currently widely used.

(8) Punch

Applications are not common and are primarily used for computer-printed labels. The requirement is to locate the drive hole on both sides of the label, or the label applied on the price tag. It is required to punch holes in the middle of the label for positioning and driving.

Article source address: http://

Smart Water Fountain For Pets

The original intention of the smart water dispenser is to allow cats to drink more water. Two water outlet modes, simulating natural springs, waterfalls and flowing water, arouse the curiosity of pets.

Filtration and purification can't be slack and provide better water quality for pets. Multi-layer color matching is the source of life for pets and a warm decoration at home; this product enriches similar products in the existing pet market. Starting from the appearance, it attracts pet owners to buy while also functioning Meet the convenience of pets drinking water.

Smart Water Fountain For Pets,Water Fountain For Pets,Fountain For Pets,Smart Fountain For Pets

DongGuan Lucky Pet Products Co., Ltd. , https://www.dgpetproduct.com