How to design a cloakroom reasonably, these seven points are very important!

[ Chinese wardrobe network ] In the home life, the cloakroom has become an indispensable pen for interior design. How to properly design a cloakroom at home, we must pay attention to the following seven aspects.

1, pay attention to the storage function

The closets in the cloakroom are mostly open, and all the clothes are exposed to the outside. It is easy to be messy and scattered. Therefore, it is important to divide the area and the splitting of the slab during design.

2, the quality of hardware accessories

For wardrobes that need to be used for a long time, hardware is an important part of quality assurance. If it is only cheap, it will cause a lot of trouble in later use.

3. Starting from ergonomics

The design of the walk-in cloakroom should be "people-oriented" and pay attention to the rational use of the storage function. The interior of the locker room is mainly made up of plates. Although the process is not complicated, it is not easy to do well.

4. Optimization of space utilization and usage ratio

There are two kinds of ratios of space utilization and use. One is that the building itself is divided, and the other is divided by the self or the designer, and the space is divided. In fact, the latter does not need to be large in space. . Some clothes that are usually not worn very much, it is best not to take up space, please clean them up after the rectification, this is the optimal embodiment of the flow space.

5, the quality of environmental protection should be good

Because the cloakroom is generally located in a relatively closed place in the house. Therefore, the environmental performance of the cloakroom should be considered well. Understanding raw materials is the most important point. The raw materials for the overall cloakroom include panels, frames and accessories. The board is its main component material, and its quality directly determines the quality of the overall cloakroom.

6, lighting design

Whether the lighting design is fair or not will have a great impact on the overall use. The lighting of the design and configuration should not only ensure the illumination, but also pay attention to the amount of fever. It is best to choose the built-in bulb, and the lamp with the lampshade is more suitable to avoid potential safety hazards. The position of the switch installation should also be considered appropriate and suitable for the owner. position.

7, moisture-proof, anti-mildew technical measures

In the structure of the house, if the storage room is placed close to the kitchen and bathroom, the problem of moisture protection is particularly important.

Chair Set

Chair Set,School Canteen Chairs,School Classroom Chairs,Classroom Sketching Chair

AU-PINY FURNITURE CO., LTD , https://www.jiangmenaupiny.com