What is the purpose of the check valve when servicing high and low temperature test chambers?

When the high and low temperature test chambers fail, you need to contact the factory for home repair. If the equipment fails to be fluorided incorrectly and there are more or less cases, the maintenance personnel will have to bring a lot of tools, such as: Freon cylinders, vacuum pumps, welding tools, kits and other repair tools. It can't be lacking, and its weight can't be underestimated. Therefore, it will bring unnecessary trouble to the maintenance personnel, waste unnecessary time and thus reduce efficiency. For this kind of problem, you have to learn to use the equipment check valve skillfully. Then someone will ask, how should the check valve be used during maintenance? The following content is revealed for you:

Introduction of high and low temperature test box check valve

When purchasing a check valve, remove its spool and weld the check valve to the process tube of the equipment. Make sure that the weld is leak-free and secure before installing the valve plug. When vacuuming, it is necessary to use a fluorinated pipe with a thimble to connect, and the other end is connected to the angle valve, and then connected to the vacuum pump. After the vacuum is completed, the vacuum pump needs to be removed, the fluorocarbon cylinder is replaced, the air in the second fluorinated tube (angular valve) is drained, and then fluorine is added.

When the test chamber is filled with fluorine, the angle valve needs to be closed and the fluorinated steel cylinder needs to be removed. After the last step, the fluorinated tube with the thimble on the check valve is removed, and the check valve is sealed with the boring head.

With the one-way valve, when the high-low temperature test chamber is "polyfluorinated" or "less fluorine", it is only necessary to remove the bulkhead, and directly discharge fluorine or fluoride from the valve core of the check valve. This also reduces the hassle for maintenance personnel, allowing them to go into battle.

What is the purpose of the check valve when servicing high and low temperature test chambers?

Click Lock SPC Flooring

Click Lock Spc Flooring,Lock Spc Flooring,Core Lock Rigid Spc Flooring,Premium Core Lock Spc Flooring

Hangzhou LvDong Building Materials Co., Ltd , https://www.ldunite.com