[ Chinese wardrobe network ] Now in order to make full use of the home space, many families of furniture are more custom-made, especially the wardrobe is the entire wall is made into a whole wardrobe , then in the end how to customize the overall wardrobe, the following website Xiaobian In order to let everyone better supervise and accept the whole wardrobe, we will introduce the installation process of the whole wardrobe and the installation method of the three sections of the important links.
First, the overall wardrobe installation process
1, the overall wardrobe installation kit preparation and its role
(1) Electric saw (weaving machine): opening (53mm or more), cutting.
(2) Square ruler: vertical scribe line, on-site opening, cutting positioning.
(3) Flat 锉: Trimming the burrs of the cutting plane of the metal parts.
(4) Short planer: The trimming plate is not flat or resized.
(5) Steel pliers: pliers, repair hardware.
(6) Impact drill: fixed cabinet with wooden plug hole and expansion screw. And various types of drills.
(7) hacksaw: cut-through, metal materials such as upper and lower rails.
(8) Glass glue: configuration, fixed, closed.
(9) Door hinge: into the column, full cover, a small amount of half cover.
(10) Three-in-one (set) The number is determined as the case may be.
(11) Electric batch: open hole, upper three-in-one screw, fixing screw, and can change various drill bits.
(12) Chain saw blade: configuration product, used for chainsaw; steel saw blade: configuration, cutting.
(13) Pencil: On-line marking.
(14) Glass glue gun: use glass glue to fix the plate or close the mouth.
(15) Wallpaper knife: unpacking, pencil sharpening, trimming.
(16) Screwdriver (cross): one for each length: screw, eccentric, and hinged. Screwdriver (one word): one for each length: screw, eccentric.
(17) Silk: a small amount of various types.
(18) Blade: Configuration, cutting.
(19) Back plate nail: a small amount. Batch head: configuration products, electric batch. Cork: a small amount.
(20) Hexagonal wrench: Adjust the partition inner bottom wheel.
(21) Hammer: nailing, adjusting the small displacement of the parts; pull ruler: measuring the plate, the size of the cabinet.
2, custom-made wardrobe installation method
(1) Determine the installation location according to the drawing. If there are a few cabinets put together, ask the customer room number first, and sort the plates according to the room number.
(2) Check the hardware of the checklist, whether the number of cabinet parts matches the number of packages of the package details, and then check whether the glass, the door is cracked, whether the door is scratched, and if there is any abnormality, immediately report it to the person in charge or place the order. Description.
(3) Unpacking: Firstly disassemble all the side panels, the top floor and the solid layer, check whether the board has a flower, and put the wrapping paper on the ground to prevent the floor from smearing the board, then apply the glue. Granules, connecting screws, good wooden plugs on the top and bottom plates, lightly placed in the order, and all the excess wrapping paper is placed in the appropriate place.
(4) If there is a difference between the upper and lower cabinets, first install the lower cabinet and then install the cabinet. When the space is large, use horizontal installation. If the space is not large enough, use vertical installation.
(5) Installation rejection: If there are plaster lines on both sides of the wall, you can leave 40mm in front of the two sides of the board, and the top part of the top cabinet is sawed under the plaster line, and then the side is inclined and plastered. Match.
(6) For the installation of the side panel to the top, first place the high side panel in a parallel installation position of 600 mm, and judge whether the height is appropriate. A 3-5mm gap is required between the high side panel and the ceiling.
(7) Installation of the standard 2+4+3 combination.
(8) Installation in the cabinet body.
3, the installation method of clothing Tongtuo
The intersection of 35mm from the top plate and 240mm from the back plate is the upper position of the clothing pass, so that the second hole screw is fixed after the clothes are placed vertically.
4, the installation of the door
(1) The installation of the upper and lower rails should be balanced, stable, and fixed with self-tapping screws.
(2) Disassemble the paper from the door and put it into the upper and lower rails to adjust the bottom wheel so that the door slides freely when it is pushed and pulled.
(3) Install the positioning piece, dustproof strip and anti-collision strip in place.
Second, the installation method of the three-section rail of the whole wardrobe door
1. First install the track rail on the side panel of the drawer so that the edge of the rail rail is flush with the edge of the side panel of the drawer. Move the rail to the appropriate position as needed. The front end is close to the back of the drawer panel and fixed with screws.
2. Then install the rail shell on the positioning hole of the side panel, move it up and down as needed, until it is in the proper position, and tighten it with the screw on the fixing hole.
3. The edge of the rail is 23mm away from the corresponding fixed layer, and the front end of the rail is 20mm away from the front edge of the side panel.
4. When there are many drawers, the rail casing can be installed from bottom to top. The distance between adjacent rails depends on the size of the drawer.
Card Case,Cardholder Wallet,Leather Card Holder,Credit Card Wallet
LIYONG BAG , https://www.hoyo-bags.com