[ Chinese wardrobe network ] about the hinge
Material: iron, steel (stainless steel), alloy, copper
Process: die casting, stamping
Type: Hinge [Iron, Copper, Stainless Steel] Spring hinge [need to punch, no need to punch] Gate hinge [common type, bearing type, flat plate] Other hinges [table hinge, door hinge, glass hinge]
Installation method
Full cover: The door completely covers the side panels of the cabinet, and there is a certain gap between the two to facilitate the safe opening of the door. Straight arm 0MM
Half cover: Two doors share a side panel of the cabinet. There is a minimum clearance required between them, and the coverage distance of each door is reduced, requiring a hinged hinge.ä¸æ›²9.5MM
Inside: The door is located in the cabinet, and next to the side panel of the cabinet, it also needs a gap to facilitate the safe opening of the door. A hinge with a very curved hinge is required. Daqu 16MM
Adjustment method
A: Door cover distance adjustment: the screw turns to the right, the door coverage distance becomes smaller (-) the screw turns to the left, and the door coverage distance becomes larger (+)
B: Depth adjustment: direct and continuous adjustment by eccentric screw
C: Height adjustment: The height can be precisely adjusted by the height-adjustable hinge base.
D: Spring force adjustment: In addition to the common three-dimensional adjustment, some hinges can also adjust the closing force of the door. Generally, the maximum force required for the tall and heavy door is used as the base point. When applying to the narrow door and the glass door, the spring needs to be adjusted. force. Rotate the hinge adjustment screw one turn. The spring force can be reduced to 50%.
Screw left turn: the spring force is weak (when used on a small door. It can reduce noise)
Screw right turn: the spring force becomes stronger (the tall door can be closed better)
Choice notice
Uses: Door hinges are mostly used for room wooden doors, spring hinges are mostly used for cabinet doors, and glass hinges are used for glass doors.
select
The door hinge generally has four bearings. The quality of the door hinge depends mainly on the quality of the bearing. Relatively speaking, the larger the diameter of the bearing, the better the wall. The thicker the wall, the better, the hand is flat and the hinge is one piece, so that the other piece can slide freely. And slower is better. The choice of spring hinges is mainly for the brand. The springs of the small brand hinges are mostly prone to aging and fatigue, causing the cabinet door to sag. Stainless steel and steel plate hinges are thinner, but have good toughness and are not easily broken. Although the cast iron hinge is thicker, it is easy to break. Some merchants deliberately deceive consumers, saying that the thicker and more expensive the siding, the different materials. When selecting the spring hinge, also pay attention to the lack of adjustment screws on the hinge, because this screw is not easy to match, not sold.
The thickness of the hinge wall of the door is related to the weight of the door leaf. Generally, the door leaf of 40 kg or more, the thickness of the hinge wall of the door should be 3.2 mm or more. Most of the 10 yuan one door hinges do not have full bearings, generally two really two fake. The price of spring hinges is quite different. The façades of well-known brands are thicker and workmanship is fine; the siding of small brands is thin and the workmanship is rough. The glass hinge has the intermediate shaft and the upper and lower shafts. The intermediate shaft needs to be punched and used less and less; the upper and lower shafts do not need to be punched, which is the choice of most consumers. The glass hinge is equipped with glass nails and glass holders. It is available in all stainless steel and stainless steel. All stainless steel is more expensive.
Bookshelf Setup,Student Bookshelf Labels,Library Bookshelf,Children ​Corner Metal Book Shelf
AU-PINY FURNITURE CO., LTD , https://www.aupinyjm.com