Three details help you choose the overall wardrobe you need

[ Chinese wardrobe net ] three details to help you choose the wardrobe you need

1. Acquisition of the right thing three: top bottom wheel

The three details above will help you buy a wardrobe.

The overall wardrobe is mainly composed of plates and hardware accessories and functional accessories, while the plates occupy more than 90% of the composition in the wardrobe, so the bickering of the plates directly affects the bickering of the overall wardrobe.

The top and bottom wheels are important accessories for sliding doors. It is necessary to face up to the selection of excellent bearing pulleys. The outer part of the bottom wheel is made of FRP material, which has the characteristics of high strength, wear resistance and low noise. The operation of pushing and pulling more than 100,000 times, the wheel body is treated with three-degree polishing and plating, never rust.

2. Acquisition of the right thing 1: Profile

There are two types of profile substrates in common: one is aluminum alloy and the other is plastic steel. Due to its light weight and high strength, aluminum alloy is a high-grade material for sliding door substrates. The steel product has been slowly replaced. The aluminum alloy is divided into a common aluminum-magnesium alloy and a smaller aluminum-magnesium alloy for special aviation. Due to the higher strength and smaller component of the aluminum-magnesium-titanium-silicon alloy. Therefore, it is favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloy. When looking at the profile, it is necessary not only to face the substrate, but also to inspect its overview. Advanced profiles include anodizing, electrophoretic coating carbon coating processes that have higher hardness and aesthetics than simple coating and plating. The membrane thickness of the electrophoretic coating used in the United States kd reaches 20 microns, and the attachment force reaches the highest level of 0 in the country, and there is no comparable scratch resistance.

3. Acquisition of the right thing 2: top and bottom rail

At the time of the selection, the top and bottom rails of the material and the same material are selected as much as possible. The bottom rail is the load-bearing part. It is necessary to encounter several times of friction, so the top and bottom rails must have high strength and wear resistance. The top and bottom rails are made of aluminum-magnesium-titanium-silicon alloy with higher strength, strong deformation resistance and longer delay operation life.

Dual Motor Standing Desk

1.5-2.5mm thick cold rolled steel plate with high mechanical strength, smooth surface and uniform thickness.

Adopt the quality motor of which listed company to ensure that the lifting is not stuck, the lifting speed is 32mm / s.the sound under no load is less than 45dB, quiet and noiseless, and does not affect other people's office.The motor has strong power, stable power output and stable load bearing of 80kg, which can meet the needs of daily entertainment and office desktop storage. Colleagues can cooperate with the function of resistance retreat and power-off protection to ensure the safety of lifting. The power in standby mode is only 0.1W, energy saving and environmental protection.

Dual Motor Standing Desk



Dual Motor Standing Desk,Standing Desk Dual Motor,Electric Standing Desk Dual Motor,Sit Stand Desk Dual Motor,Electric Sit Stand Desk Dual Motor

Suzhou Uplift Intelligent Technology Co., Ltd , https://www.officeliftdesk.com