[ Chinese wardrobe network ] Now many families are using the combination wardrobe , it has a strong storage function, and is deeply supported and supported by consumers. However, sometimes we may need to disassemble it ourselves. It is very necessary to understand the disassembly process of the combination wardrobe. Because in the event of an error, the combination wardrobe will be damaged. Next, let Xiaobian introduce to you how to install and disassemble the combination wardrobe!
Combination wardrobe installation method
1. First of all, we must first make the bottom plate well: it is very important to lay the foundation. If the bottom is not well, the structure of the whole wardrobe will be unstable. When installing, pay attention to the interface to be aligned, install the document, shake it by hand without shaking, the bottom usually has drawers, you can not install first, first determine the frame, reserve the installation space.
2, then install the backboard: pay attention to keep the backboard and the bottom plate at a right angle of 90 degrees, can not be tilted, it is best to use a measurement tool to carefully measure to avoid errors.
3. Install the side panel and the top panel: After installing the back panel, install the side panel and the top panel of the combined wardrobe. One side of the side panel is connected to the back panel, and one side is connected to the bottom panel. The panel and the panel are at a right angle of 90 degrees. Installed on the top of the closet, pay attention to the stability of the interface, and firmly fix it on the top.
4, the installation of the remaining parts: Now, the general frame of the combination wardrobe has been established, and finally to install the remaining parts such as cabinet doors, laminates, clothes rails, clothes trays, drawers, etc., these combination wardrobe installation maps have specific signs, as long as According to the wardrobe space reserved by the merchant, it can be installed one by one.
Combination wardrobe removal method
Knowing how to install the combination wardrobe, it is very easy to disassemble the combination wardrobe, as long as it is the opposite. Of course, the first step you need to do is to empty the combination wardrobe. Carry out all the clothes and other items in the closet. In order to facilitate the movement and reduce the weight of the object, it is recommended to remove all the drawers. Next, you need to use a screwdriver to unscrew the set screws one by one and remove the door leaf. After disassembling, remember to put the pair in a moment and put the screws together in a drawer. For the convenience of operation, prepare a small bench. Then you need to remove the top cover and the cabinet and move the cabinet down the base.
Suzhou Longliqi Imp.&Exp. Co.,Ltd , https://www.longliqiexp.com