The birth of the sofa - a set of sofa production process and process

The most typical of the furniture is the sofa; after a busy day, we come home and usually like to lie on our comfortable sofa. It can be said that the sofa is the furniture that we touch the most every day except the bed. So, how is the sofa made? Do you know? It doesn't matter, today Xiaobian will take everyone to see, the craft and process of a sofa.

sofa

A set of sofas, its basic production process can be divided into: the production of the sofa frame, the bottom of the cut sofa feet sitting on the color sponge bonding nails, suit sofa jacket.

1, the production of the sofa frame, the base

Before the sofa starts to be produced, it is necessary for the master with rich experience to draw the plate. Without a good model, it is impossible to make a good sofa. Because every joint needs fine calculations, it's not a little bit of a gap.

Sketchpad

After the plate is finished, the frame of the sofa is officially produced. The current sofa frame is mainly divided into two materials: solid wood and composite panels. The frame of the sofa, in Xiaobian, seems to be similar to the human skeleton, supporting the entire sofa. The robustness of the sofa frame structure and the rationality of the design angle will affect the quality and function of the sofa.

Sofa structure diagram

Wood frame production process

Dry wood

Since the wood contains moisture, the moisture content of the wood is controlled to be within 12% by drying, which can greatly reduce the deformation rate of the wood. Not easy to deform, rot and insects.

2. Cutting material

Cut back, armrests, etc. according to the sample drawing. After that, the wood is polished, wind-cut, trimmed and other processes.

3. Reinforcement

The parts of the sofa frame are tightly joined by the opening and closing method.

The craftsmanship has been passed down in China for thousands of years. If you have an old piece of furniture in your home, it is definitely spliced ​​using the enamel process. Otherwise, it won't be so strong. In addition, in order to reinforce the frame, each joint of the frame is positioned using a precisely cut wooden tripod, which must be coated with a gun or a screw. (reinforcement)

Here you need to pay attention to some small details, the interface should be stitched accurately.

4. Bottoming

Mainly to add springs and bandages to the sofa. Put a rubber band on the back of the sofa! Because the backing frame does not have the same strength as the seat, you can use the elastic band. Some people use so-called black belts, which are made of waste tires.

Springs generally use serpentine springs (also known as S-shaped springs) to increase the bearing capacity of the sofa, and then use special spring clips to reduce noise. The spring installation must be secure and there must be no movement when pressed. The quantity is based on specific needs.

5. Mongolian mesh

The cushion area is covered with a breathable mesh cloth that is acquainted with, so that it can effectively prevent moisture and ventilate and increase the life of the sofa.

Sofa spring

2, sofa filler

The padding inside the sofa includes sponge, down and rayon. The types of sponges are mainly high, medium and low sponges of different densities. The sponge inside the sofa will be related to the sitting feel of the sofa. The quality of the filled sponge also affects the life of the sofa.

(1) Cut out sponges of different shapes according to the shape of the sofa.

(2) Wrap the sponge around the outside of the sofa frame.

Extended reading: sofa maintenance method

sponge

3, jacket cutting and sewing

The sofa you see, each face is a board, called the leather board, the leather board is placed on the cowhide, pay attention to avoid the unqualified skin. Start cutting the skin later.

It is also possible to use a blade to draw, of course, if it is a cloth, you can use electric scissors, and you can cut multiple layers at a time.

After cutting the skin, the sofa cushions, armrests, backrests, and sorting are packaged so that the next "sewing" can be smoothly and efficiently produced.

Sewing, flat car, cutting the skin, piece by piece, sewing this process is very important, related to the appearance of a set of sofas.

Cutting and sewing

4, the pressure line

Single-needle car press line, single line and double line need to be pressed to the margin of 5 mm, the line is symmetrical, straight and clear, and the rule is uniform.

Pressure line. The double-needle car presses the line and stacks the fabrics at the junction of the flat cars. The double-push cars will be stacked and sewn together. The same is true for the entire coat making process of the fabric sofa. However, the cloth cutting will be easier than cutting the skin. But it is the same for skilled workers.

Pressure line

5, transfer tips

Put the sewn sofa holster or cloth cover on the sofa. According to the appropriate positioning of the sofa, the nail is fixed. Cloth sofas need to be equipped with zippers and other hardware. After these processes are completed, you can see such a leather sofa...

leather sofa

Or such a fabric sofa

Beautiful fabric sofa

Vacuum Coffee Mug

Stainless Steel Coffee Mugs are made from high-grade 18/8 stainless steel. This material is food grade, non-toxic, durable and easy to clean.

Our Stainless Steel Bottles are mostly Stainless Steel Vacuum Coffee Mugs. They have a double-wall vacuum treatment, so they can ensure your drink keeps as it is. And you don't need to worry about getting your hands cold or hot.

Stainless Steel Single Coffee Mug has a single wall. It sacrifices thermal insulation and improves portability. Holding it in your hand all the time will not cause any discomfort.

Vacuum Coffee Mug,Vacuum Car Mug,Stainless Steel Coffee Mug,Bamboo Coffee Mug

Ningbo Auland International Co.,Ltd. , https://www.ecocolabottle.com