According to the process of coating a paper print, the coating process can be divided into three categories: dry coating, wet coating, and pre-coating.
The dry film coating method is currently the most commonly used film coating method in China. It is applied with a layer of adhesive on a plastic film, and then it is dried in a dry drying tunnel of a film laminator to remove the solvent from the adhesive, and then heated. Press-bonded paper products with paper products.
In the wet coating method, a layer of adhesive is coated on the surface of the plastic film, and under the condition that the adhesive is not dry, the film is adhered by a pressure roller and a paper print. Since the advent of the water laminating machine, the water-based laminating process has been popularized and applied. This has the advantages of simple operation, small amount of adhesive, and no organic solvent that destroys the environment. The lamination film has high strength, High grade, easy recycling and other characteristics are inseparable. At present, the coating process is increasingly favored by domestic packaging manufacturers and has been widely used in packaging such as gift boxes and handbags.
The pre-coating film method is a direct purchase of a plastic film coated with a binder by a film factory. When the film needs to be coated, the film is hot-pressed on the film-coating equipment together with the paper print to complete the film coating process. The pre-coating process began in the 1990s. Through the use of special equipment, the hot-melt adhesive or low-temperature resin was evenly coated on the film substrate according to the design. The pre-coated film was obtained. The pre-coating method eliminates the preparation, coating, and drying of adhesives. The entire coating process can be completed in a few seconds. No pollution to the environment, no fire hazard, and no need for cleaning. Plastic equipment and so on. At present, the process has been used in the fields of medicine and food packaging.
It is also called new designed vibrating exercise machine , It is a 3D with two 180W motors ultra thin Vibration Machine . It is a popular Luxury Vibration Machine in the world . The operation screen can show model , speed , time , power , etc . The most different with other items is it has 3D model , has blue tooth music . The fitness rope has a lovely frog carton animal photos . The emote control it when the machine working. The Max bear weight is 120KGS , Max amplitude is 10MM , The machine foot dimension is 74*34CM , speed range is 20 levels . One 20`FT container can load 350PCS , 40`HQ can load 850PCS .

Slimming Exercise Machine
Slimming Exercise Machine,500W Vibration Machine,Ultrathin Crazy Fit Massage,1000W Vibration Machine
ZHEJIANG MEIER FITNESS EQUIPMENT CO., LTD , http://www.chinameier.com